Feline and other mammals monitoring in Tres Mesas wind farm - Tamaulipas, Mexico

Ocorrência
Versão mais recente published by ENGIE on mai. 21, 2024 ENGIE
Publication date:
21 de maio de 2024
Published by:
ENGIE
Licença:
CC-BY-NC 4.0

Baixe a última versão do recurso de dados, como um Darwin Core Archive (DwC-A) ou recurso de metadados, como EML ou RTF:

Dados como um arquivo DwC-A download 2.730 registros em English (61 KB) - Frequência de atualização: atualmente
Metadados como um arquivo EML download em Spanish (16 KB)
Metadados como um arquivo RTF download em Spanish (10 KB)

Descrição

The projects Tres Mesas Wind Farm Phase 3 (TM3) and Phase 4 (TM4) are located in the municipality of Llera de Canales, in the state of Tamaulipas, Mexico within an area where other wind farms operate. The available project area is 8,902.64 hectares. TM4 has an environmental impact assessment authorization from the Secretaría de Medio Ambiente y Recursos Naturales, which established conditions for the development of the project, including a study to analyze the distribution and current status of mammals and big felids.

The document data comes from mammals and big felids monitoring in TM3 and TM4 wind farms. The monitoring database presented was carried out from January to December 2023.

Registros de Dados

Os dados deste recurso de ocorrência foram publicados como um Darwin Core Archive (DwC-A), que é o formato padronizado para compartilhamento de dados de biodiversidade como um conjunto de uma ou mais tabelas de dados. A tabela de dados do núcleo contém 2.730 registros.

This IPT archives the data and thus serves as the data repository. The data and resource metadata are available for download in the downloads section. The versions table lists other versions of the resource that have been made publicly available and allows tracking changes made to the resource over time.

Versões

A tabela abaixo mostra apenas versões de recursos que são publicamente acessíveis.

Direitos

Pesquisadores devem respeitar a seguinte declaração de direitos:

O editor e o detentor dos direitos deste trabalho é ENGIE. This work is licensed under a Creative Commons Attribution Non Commercial (CC-BY-NC 4.0) License.

GBIF Registration

Este recurso foi registrado no GBIF e atribuído ao seguinte GBIF UUID: a648633a-e94d-4bdd-9c00-c5d1773c2f9e.  ENGIE publica este recurso, e está registrado no GBIF como um publicador de dados aprovado por GBIF France.

Palavras-chave

Occurrence; Observation

Contatos

Valeria Marin
  • Originador
  • Environmental Coordinator
Karla Diaz
  • Originador
  • Platform Coordinator
Olivia Falcony
  • Ponto De Contato
  • Sr. Manager Platform and Processes
Karla Díaz
  • Ponto De Contato
  • Platform Coordinator
Gerardo Ceballos
  • Provedor Dos Metadados
  • Main C Researcher
Instituto de Ecología de la Universidad Nacional Autónoma de México
MX

Cobertura Geográfica

Renewable projects Tres Mesas 3 (TM3) and Tres Mesas 4 (TM4) in Tamaulipas, Mexico.

Coordenadas delimitadoras Sul Oeste [23,392, -98,968], Norte Leste [23,461, -98,862]

Cobertura Taxonômica

Nenhuma descrição disponível

Reino Animalia
Filo Chordata
Class Mammalia
Ordem Artiodactyla, Carnivora, Lagomorpha, Didelphimorphia
Família Canidae, Cervidae, Didelphidae, Felidae, Leporidae, Mephitidae, Mustelidae, Procyonidae, Tayassuidae

Dados Sobre o Projeto

Monitoring program for mammals and three focal species of feline in wind farm Tres Mesas 3 and Tres Mesas 4 through tramp camera methodology to document its abundance, compare it over time, and evidence the current conservation status of species.

Título Feline and other mammals monitoring in Tres Mesas wind farm
Descrição do Design 30 photo-trapping stations were installed, of which 13 were double stations, two cameras at each photo-trapping station placed one on each side of the road to identify some species at the individual level; a total of 43 camera traps were installed. The traps were installed on roads, trails, paths, and bodies of water where tracks, excrement, or any trace left by felids were observed. The calibration of these was performed with a minimum of 3 and a maximum of 5 meters away from the point where the animals potentially present within the study area were estimated to transit and each camera was placed at a height of ~40 to 60 cm, which is ideal for medium and large mammal species. The separation between stations was ~1 km, a distance necessary to avoid overestimating the relative abundances of felids.

Métodos de Amostragem

30 photo-trapping stations were installed, of which 13 were double stations, two cameras at each photo-trapping station placed one on each side of the road to identify some species at the individual level; a total of 43 camera traps were installed. The traps were installed on roads, trails, paths, and bodies of water where tracks, excrement, or any trace left by felids were observed. The calibration of these was performed with a minimum of 3 and a maximum of 5 meters away from the point where the animals potentially present within the study area were estimated to transit and each camera was placed at a height of ~40 to 60 cm, which is ideal for medium and large mammal species. The separation between stations was ~1 km, a distance necessary to avoid overestimating the relative abundances of felids.

Área de Estudo The geographic location of the eolic project is considered an important region between the Sierra Madre Oriental and the Sierra de Tamaulipas. The site is located near the City of Llera Canales (municipal head). The Project has been developed within a plot area of 89,023 hectares.

Descrição dos passos do método:

  1. The first step for the elaboration of the analyses will be the creation of the database obtained in the camera traps, for which the Renamer program is used, which creates efficient databases that allow the data to be used for further analysis. Once the files are renamed, the programs Data Organize and Data Analyze are used to generate output files for density estimation and activity pattern analysis. The HotSpotter program is used for identification at the individual level. Once identified at the individual level, the density is determined through analysis within the programming environment Rstudio version 4.0.3 (R Code Team, 2017) in the freely available software secr version 4.3.3.3.

Metadados Adicionais